Solai allege

Geri dönüştürülmüş plastik ürünlerle bina: sürdürülebilir yapı için U-Bahn® Beton ile hafif plakalar

Modern inşaatta, yenilikçi ve sürdürülebilir çözümler bulmak giderek daha zor hale gelmektedir. Bu bağlamda, U-Bahn® Beton ile hafif plakalar, çevre dostu bir yaklaşımla yüksek performanslı bir çözüm olarak öne çıkmaktadır.
Geri dönüştürülmüş plastikten üretilen U-Bahn® Beton modüler kalıp, döngüsel ekonominin açık bir örneğidir. Bu teknolojinin avantajları yalnızca çevresel boyutla sınırlı kalmayıp, aynı zamanda inşaat verimliliği açısından da birçok somut fayda sağlamaktadır.

Neden tek yönlü hafifletilmiş bir döşeme oluşturmak için U-Bahn® Beton’u seçmelisiniz?
Hafif ve istiflenebilir bir kalıp olan U-Bahn® Beton, büyük bir tasarım esnekliği sağlar. Tuğla pinyatalar ve polistiren kalıpların aksine, kabloların ve tesisatların geçişine olanak tanıyan bir boşluk yaratır.

PERFORMANS AVANTAJLARI

Maksimum Çok Yönlülük
U-Bahn® Beton, prekast döşeme üretimine olanak tanıyarak inşaat süresini hızlandırır ve işçilik maliyetlerini azaltır.

Yüksek Hassasiyet ve Düzenlilik
U-Bahn® Beton kalıp, mükemmel beton nervür geometrisini garanti ederek optimum yapısal performans sağlar.

Sahada İyileştirilmiş Temizlik
U-Bahn® Beton kalıbın kompakt ve modüler yapısı, sahadaki atık ve döküntülerin en aza indirilmesine yardımcı olarak daha düzenli ve daha güvenli bir çalışma ortamı sağlar.

Geliştirilmiş Sismik Davranış
Çift betonarme kabuğun varlığı, U-Bahn® Beton plaklara daha fazla sağlamlık ve sismik direnç kazandırarak onları yüksek sismik risk taşıyan alanlar için ideal hale getirir.

BAŞVURULAR
U-Bahn® Beton, konut, ticari, ofis, endüstriyel yapılar ve ayrıca okul binaları ile hastaneler gibi kamu yapıları için hafifletilmiş tek yönlü döşemeler için ideal bir çözümdür.

U-Bahn® Beton, beton ve ağırlık tasarrufu gereksinimleri ile birlikte tek yönlü kirişler ve döşemeler gerektiren tüm uygulamalarda kullanılır. Özel bir kullanım türü ise, normal açık hava inşaatlarında olduğu gibi aşağıdan yukarıya doğru çalışmak yerine, taşıyıcı döşemelerin yukarıdan aşağıya doğru inşa edildiği ve döşemenin inşası ile alt seviyenin kazısının dönüşümlü olarak yapıldığı ‘yukarıdan aşağıya’ tekniği ile gerçekleştirilen yeraltı inşaatlarıdır. Tarihi şehir merkezlerindeki yeraltı otoparkları, kazıya bitişik çok sayıda binanın varlığı ve yol sisteminin hızlı bir şekilde restore edilmesi ihtiyacı gibi bariz kısıtlamalar nedeniyle genellikle bu teknik kullanılarak inşa edilmektedir.

Water Storm managemen

Atlantis Sistemi, bir yağmur suyu yönetim çözümüdür

Yerleşim yoğunluğundaki sürekli artışla bağlantılı sürekli betonlaşma, insan gelişimi için gerekli olmasına rağmen, yüzey ve yeraltı suyu rejiminde büyük değişikliklere neden olmaktadır. Dikkate alınması gereken bir diğer husus da artan sıcaklıkların hava modellerini de etkilediği iklim değişikliğidir. Bu iklimsel eğilimin en belirgin etkileri, yüksek konsantrasyonlu dönemlerde daha şiddetli ve yoğun yağışlar, ardından uzun süreli yağışsız dönemler ve bunun sonucunda kuraklıklardır. Olayların bu şekilde aşırılaşması, giderek artan şiddetli ve ani seller nedeniyle sel olasılığında önemli bir artışa neden olmaktadır.

Toprak sızdırmazlığı her şeyden önce yağmur suyunun toprak tarafından emilmesini engeller, akış süresini kısaltır ve sonuç olarak suyu alıcı su kütlesine çok daha hızlı bir şekilde getirir. Ortaya çıkan sorunlardan bazıları şunlardır:

Su rezervlerinde azalma: Daha az yağmur suyu alarak yeraltı su tablaları alçalır ve kuruma riski ortaya çıkar.

Kanalizasyon aşırı yüklenmesi: Bertaraf edilmesi gereken su hacmindeki ani bir artış, bir sistemin işlevselliğini tehlikeye atarak su baskınlarına ve sosyal maliyetlere yol açabilir.

Su kalitesi: Su kentsel alanlardan aktıkça giderek kirlenecek ve içme suyunun daha fazla israf edilmesine yol açacaktır.

Su baskını riski: Daha büyük ölçekte, nehir havzaları da çökebilir ve genellikle trajik sonuçları olan sellere neden olabilir.

Vasca di accumulo delle acque metereologiche

Hidrolik değişmezliğin yeni inşaatlarda ve dolayısıyla su toplama ve laminasyon tanklarının yapımında bir standart haline geldiği bir bağlamda, Atlantis Sistemi bunların gerçekleştirilmesi için pratik ve etkili bir çözüm sunmaktadır.

Atlantis Sistemi sayesinde yağmur suyu toplama tankları, dağıtım tankları ve su geri dönüşüm seraları inşa etmek mümkündür. Betonarme tanklar, bir döşeme, çevre duvarları ve sütunlarla desteklenen bir döşemeden oluşur ve yaya kaldırımları, yeşil alanlar veya otoparklar gibi farklı yük türlerini desteklemek üzere tasarlanmıştır.

Hem ticari hem de endüstriyel ön yolların, yolların ve otoparkların altına inşa edilebilirler ve olağanüstü meteorolojik olayların neden olduğu sel etkisini azaltmak için tasarlanmışlardır. Bu sayede betonun topraktan aldığı drenaj kapasitesi, herhangi bir görsel veya çevresel etki olmaksızın toprağa geri kazandırılır.

Suyun korunması alanındaki mevzuat, sel tehlikesini önlemek için su toplama ve dağıtım depolarının inşa edilmesi gerektiğini vurgulamakta ve sürdürülebilir arazi dönüşümü konusunun giderek daha önemli hale geldiğini belirtmektedir.

Örneğin, kamu yetkilileri yağmur suyu dağıtım depolarının inşasından önemli avantajlar elde edebilirler: ilk olarak, su tablaları kurutulmak yerine zenginleştirilir; şehrin genişlemesiyle orantılı olarak kanalizasyon şebekesini büyütmeye gerek kalmaz ve son olarak, bir bölgeye – belediye, il, nehir havzası – yönelik bir maliyet-fayda analizi, kapsamlı bir hidrojeolojik yeniden geliştirme planının uygulanmasına olanak sağlayabilir ve böylece sel riskini önemli ölçüde azaltabilir.

New accessory for the IGLU’® product

Daliform Group presents PROLUNGA (EXTENSION), the new accessory of the range IGLU’®

Outcome of studies by the R&D office of the company, the new accessory “Prolunga (extension)” encloses all the technical know-how of Daliform Group.

Available for Iglu’® from height 14 to 80 cm, the accessory “Prolunga (extension)” permits to adapt the laying of the crawl space to non-multiple dimensions of Iglu’® formwork and to block the passage of concrete inside the cavity.

The new product, made of recycled and recycable plastic, permits the development of a ventilated slab of any shape and dimension, allowing the simoultaneous casting of curbs, beams, foundation walls and slab, with a considerable reduction in time taken to shutter, lay and cast

Daliform Group supports FAI – The Italian Fund for the Environment

Daliform Group supports FAI – The Italian Fund for the Environment. FAI’s mission aims to promote and protect Italian culture, nature, art, history and traditions.
Daliform Group is a company that bases its business on the values of transparency, fairness and support for local territory.
It’s for this reason that we decided to join Corporate Golden Donor, FAI’s support program for companies.

This is a farsighted and responsible choice, a concrete gesture to value the Corporate Social Responsibility of our company.
Art, culture and landscape are important resources and constitute the ideal sphere where sharing valuable experiences.
Joining the program means even being able to involve employees and clients in initiatives and special occasions inside the heritage protected by FAI.

Easy Park® Griglia di protezione per prati già formati

Awareness and sustainability in the Daliform Group lawn protection grids

During these years, the problem of plastic pollution of our planet has reached an unprecedented urgency. More and more we realize the importance of being able to recycle it, giving it new life, thus avoiding further contamination of the environment and the living organisms that populate it.
Even in the building sector, recycling is became one of the key point on the new construction.
For this reason, Daliform Group, which has always been committed to the creation of recycled plastic products, is pleased to highlight the numerous advantages that can be acquired by using its lawn protection grids for the creation of driveway and pedestrian flooring (with lawn or gravel finishing) or for the protection of already formed lawns.
These grids are made totally or partially of recycled plastic and it is precisely the particular compound that allows to achieve an excellent quality-price ratio.
Among the numerous products of the Daliform Group GREEN division, in addition to the flagship product PRATOPRATICO®, we can highlight E.C.O. by Pratopratico® and Green Park, capable of offering excellent quality-price ratio and, at the same time, excellent technical performance.
Another interesting product is Easy Park®, very easy to pose on the existing lawn, it could be used also in case of temporary floors for events, parking and landing areas for helicopters.
Using the Daliform Group lawn protection grids, among others, the following advantages can be obtained: no waste production (recycled and recyclable material), respect for the hydrogeological balance of the soil, better aesthetic performance of the environment, resistance to atmospheric agents.
So why recycle plastic and reuse it? For Daliform Group, the answer is clear: “Because operating with the utmost respect for the environment, with a view to awareness and sustainability, is an ethical gesture from which our generation can no longer escape”.

IGLU'® Smart fondazioni ventilate per cella frigorifera

IGLU’® SMART the smart ventilated cavity

IGLU’® SMART is the disposable formwork’s innovative system for the creation of ventilated cavities with more flexibility and simplicity and a faster installation speed.

Specialized in the production of recycled plastic products for the construction industry, Daliform Group has signed numerous innovations over the years that have improved the way of building.
Among these Iglu’® Smart, a disposable eco-friendly formwork made of recycled plastic, ideal for covering large surface areas in considerably shorter time frames than with normal formworks.
Iglu’® Smart’s unique, innovative configuration and special interlocking system with adjustable notches in its two appendages, allow for easy adjustment of the size of the formwork’s plan in both directions, at right angles to each other, horizontally and vertically.
In addition to the standard dimensions 50 x 50 cm, 52.5 x 52.5 cm, and 55 x 55 cm, with Iglu’® Smart it is also possible to obtain non-standard dimensions such as 55 x 52.5 cm, 52.5 x 50 cm, 50 x 55 cm, or 50 x 52.5 cm.
Simply by adjusting the position of the overlap between the formworks, i.e. by shifting the formwork using the pre-set notches, without using additional accessories such as extension systems, for example.

Riqualificazione urbana a Boulogne-Billancourt in Franciav

DALIFORM GROUP – Creation and production of plastic products for the construction industry

The Daliform Group Company in Gorgo al Monticano (TV), has always been concerned with providing innovative solutions in the construction field that are oriented towards environmental protection and energy saving.
The Iglu’® and Atlantis Systems, based on disposable formworks in 100% recycled polypropylene, originally made to create ventilated crawl spaces and cavities, over time have found more and more uses in other fields of application, like: rainwater collection tanks, bike paths, green houses, anti-root applications, green roofs, geothermic and heat recovery.
During the last years these products have had an important success on architects and landscapers with their use on green roofs in urban areas.
Nowadays urban spaces must be revised: the citizen who lives in large cities like Milan, Paris, London, Tokyo and New York feels the need for greenery, shuns asphalt and concrete.
Not surprisingly, and increasingly, both in the interventions of new urbanization and urban redevelopment, the best architects of the moment foresee that the ground level above the basements are used as greenery with trees, plants, bushes, lawns and, of course, equipped with play areas for children. These areas are increasingly thought of as a real simulation of natural environments, with slopes, hills and changes in altitude.
The most important problem during the realization of these compositions is to create different levels without excessively burdening the load-bearing structures.
Thanks to the Iglu® and Atlantis System products, it is possible to create spaces at different levels quickly, easily and absolutely economically by configuring the space in a flexible and dynamic way: a simple concrete completion casting, reinforced with a very light electro-welded mesh, will provide you with a support that, covered with a layer of a few tens of cm of fill soil, will transform what was previously a cemented space into a real green urban area.
Among the many references of Daliform Group products, one stands out in particular in the context of a social housing complex’s redevelopment in the city of Boulogne Billancourt (Paris), subject to massive redevelopment by great architects such as Jean Nouvel, Renzo Piano, Herzong & De Meuron to name a few.
Daliform Group is the point of reference in the construction industry for those who design, distribute and construct.
Is an innovative company that spreads the culture of excellence by offering the best products and best solutions for the environments in which we live, work and enjoy ourselves, that aspires to help everyone working in construction to do it better, more efficiently and more attractively, improving the quality of life.

Iglu’® Green Roof by Daliform Group for green roofs in the cities. New gardens for the city’s life.

Green architecture against the social degradation. A trend which is spreading day by day not only like a concept of the residential and private building’s furniture, but also to redevelop some degraded suburbs’ areas with innovative solutions from the technological point of view.
This is the case of a social housing complex in the city of Boulogne Billancourt (France), once inhabited by the workers of the Citröen, now incorporated by Paris itself and subject to massive redevelopment by great architects such as Jean Nouvel, Renzo Piano, Herzong & De Meuron to name a few. What was once a popular area is now turning into one of the most modern and chic districts of the “Ville Lumière”. The intervention concerned two buildings built in the 1960s, in a state of decay and inhabited by socially difficult people, to whom it was decided to make the living space more pleasant and livable: the separation surface between the two buildings, to cover the garages, it was then transformed into a green area.
The main problem that arises in the realization of these compositions is to create the different levels without excessively burdening the load-bearing structures. Of course, the existing structure had limited possibilities to be further loaded and therefore the use of Iglu’® Green Roof and the Atlantis System was the ideal solution to the problem. In fact, thanks to the Iglu’® Green Roof and the Atlantis System it was possible to create spaces at different levels quickly, easily and absolutely economically.
Daliform Group has always been concerned with providing innovative solutions in the construction field that are oriented towards environmental protection and energy saving. The Iglu’® and Atlantis systems, based on disposable formworks in 100% recycled polypropylene, initially created to create ventilated crawl spaces and cavities, over time have found increasingly widespread use in other fields of application such as: recovery and collection of rainwater, cycle paths and greenhouses, anti-root applications, roofs and hanging gardens, geothermal energy and heat recovery.

IGLU’® for the new Paul Biya Stadium

Paul Biya Stadium (even known as Olembe Stadium) is a sport facility in Yaoundé, in Cameroon, for whose construction, some innovative materials and solutions, such as Iglu’® by Daliform Group, were chosen.
With its 60,000 seats, Paul Biya Stadium aims to become the new landmark of the Cameroonian capital.
Iglu’® was chosen and used to create ramps, steps, structural fillings and height compensations.
The quality of the used recycled material, its particular geometric conformation, the thickness, the product’s dimension and the processing techniques make Iglu’®, by Daliform Group, the excellence product on the worldwide market.
Numerous national and international awards have been received over the years which testify to the rich and appreciated contribution that Iglu’® has managed to give to the world of construction.

Fight against the capillary rising moisture with IGLU’®

Iglu’® is the leading market product, created and patented for the realization of sanitary spaces, ventilated cavities, under-floor cavities, ventilated floors and roofs during the construction and renovation of civil and industrial buildings.

The ventilated cavity, realized with Iglu’®, is an effective solution to the problem of rising moisture on the flooring, because the under-floor cavity’s ventilation placed under the floor, dries it naturally. Thanks to the cavity, the building can breathe, by constantly eliminating the moisture: this technique was born already at the time of the ancient Romans.
To guarantee an appropriate ventilation, both in renovation and in new buildings, the connection of the ventilated cavity to the outside with simple pipes is necessary.
As a matter of fact, to obtain a natural “chimney effect” is necessary to position the inlet holes on the northern side at a height just off the ground and the outlet holes on the southern side at a higher point (preferably up to the roof), being careful to connect the various rooms of the foundation grid together so that the entire under-floor cavity is connected. The ducts positioned inside the wall with southern exposure will heat up, causing an upward motion intaking air from the under-floor cavity.

A ventilated under-floor cavity created with Iglu’® represents an effective, quick and economic solution that makes it possible to send humidity and dangerous Radon gas to the atmosphere, which is beneficial to our health.